Cooper Lighting Landscape Lighting TMU40SWW3SF User Manual

STREETWORKS  
Type  
DESCRIPTION  
The Streetworks Talon is the most versatile, functionally designed,  
universally adaptable outdoor luminaire available. The Talon brings  
outstanding performance to walkways, parking lots, roadways, building  
areas, and any security lighting application. U.L. listed and CSA certified for  
wet locations. IP65 Rated.  
Catalog #  
Project  
Date  
Comments  
Prepared by  
SPECIFICATION FEATURES  
Standard with mogul-base socket  
for HPS and 100-400W MH.  
Standard with medium-base socket  
Construction  
One-piece heavy-wall, die-cast  
aluminum construction with  
Mounting  
Extruded 8" aluminum arm  
includes internal bolt guides  
allowing for easy positioning of  
for 70W MH and below. All optical  
integral reveal channels along top  
modules feature quick disconnect  
surface of housing. Internal cast-in  
fixture during installation to pole  
or wall surface. Standard single  
carton packaging of housing,  
square pole arm and round pole  
adapter for contractor friendly  
arrival of product on site.  
wiring plugs and are field rotatable  
wall separates optical and  
in 90° increments.  
electrical chambers allowing  
components to operate cooler.  
Electrical  
Offered standard with ballast and  
One-piece die-cast aluminum door  
frame with integral cast-in gasket  
related electrical componentry  
channel seals optical chamber to  
hard mounted to die-cast housing  
Finish  
an IP65 rating. Stainless steel  
details for optimal heat transfer  
latches and hinges allow for  
Housing and arm finished in a 5  
stage premium TGIC polyester  
powder coat paint, 2.5 mil nominal  
thickness for superior protection  
against fade and wear. Standard  
colors include black, bronze, grey,  
white, dark platinum, and graphite  
metallic.  
and operating efficiency. Optional  
toolless opening and removal of  
galvanized steel swing-down  
door frame.  
power tray with integral handle.  
Electrical disconnects allow tray to  
be completely removed from the  
Reflector  
Choice of 14 high efficiency optical  
housing providing ample hand and  
systems utilizing horizontal and  
tool room for attachment of fixture  
during installation.  
vertical lamp orientations. Optional  
high efficiency segmented optical  
systems constructed of premium  
LAMP TYPE  
WATTAGE  
95% reflective anodized aluminum  
sheet. Optical segments are rigidly  
mounted inside a thick gauge  
aluminum housing for superior  
protection. All segment faces are  
clean of rivet heads, tabs or other  
means of attachment which may  
cause streaking in the light  
Metal Halide  
175, 250, 400W  
Pulse Start Metal Halide  
Super Metal Halide  
High Pressure Sodium  
70, 100, 150, 175, 200, 250, 320, 350, 400W  
175, 250, 400W  
70, 100, 150, 250, 400W  
TMU  
TALON MEDIUM  
distribution.  
70-400W  
High Pressure Sodium  
Pulse Start Metal Halide  
Super Metal Halide  
Metal Halide  
DIMENSIONS  
8"  
[203mm]  
11 7/8"  
[302mm]  
AREA LUMINAIRE  
E N E RG Y DATA  
Hi-Reactance Ballast Input Watts  
70W HPS HPF (95 Watts)  
100W HPS HPF (130 Watts)  
150W HPS HPF (190 Watts)  
150W MH HPF (185 Watts)  
1 3/4"  
[45mm]  
23 1/4" [590mm]  
8"  
[203mm]  
CWI Ballast Input Watts  
250W HPS HPF (300 Watts)  
16 1/4" [412mm]  
CWA Ballast Input Watts  
175W MH HPF (210 Watts)  
200W MP HPF (240 Watts)  
250W MH HPF (295 Watts)  
320W MP HPF (365 Watts)  
400W MP HPF (448 Watts)  
400W MH HPF (455 Watts)  
400W HPS HPF (465 Watts)  
DRILLING PATTERNS  
TY P E “ M ”  
WA L L M O U N T  
2 5/16"  
[59mm]  
E P A  
12"  
[305mm]  
Effective Projected Area: (Sq. Ft.)  
Recessed Door w/o Arm: 0.79  
Deep Door w/o Arm: 1.02  
8" Arm: 0.43  
3/4" [20mm]  
dia. hole  
2 7/16" [124mm]  
4 7/8"  
[124mm]  
10 1/2"  
[267mm]  
4 7/8" [124mm]  
S H I P P I N G DATA  
Approximate Net Weight:  
Recessed Door 47 lbs. (21.79 kgs.)  
Deep Door 52 lbs. (23.63 kgs.)  
(2) 5/8" [16mm]  
dia. holes  
6 1/2"  
[165mm]  
8"  
9/16" [14mm]  
Dia. Hole (4)  
[203mm]  
Specifications and Dimensions subject to change without notice.  
TMU_ADH081549  
08/05/2008 2:32:09 PM  
Consult your representative for additional options and finishes.  
 
TALON MEDIUM  
TMU  
ORDERING INFORMATION  
SAMPLE NUMBER: TMU40SWW3SF  
TMU  
Product Family 1  
TMU=Talon Site  
Medium  
Accessories  
(order separately/replace XX with color designation)  
OA/RA1016=NEMA Photocontrol (105-285V)  
OA/RA1027=NEMA Photocontrol (480V)  
OA/RA1201=NEMA Photocontrol (347V)  
OA/RA1013=Shorting Cap  
Lens Type  
F=Flat Glass  
S=Sag Glass  
Options (add as suffix/must be  
ordered in alphanumeric order)  
1=Single Fuse  
Voltage  
2=120V  
0=208V  
4=240V  
7=277V  
8=480V  
9=347V  
N=Multi-Tap wired 277V  
W=Multi-Tap wired 120V  
V=Multi-Tap wired 240V  
[120, 277 or 347V] 6  
Lamp Wattage 2  
70=70W  
10=100W  
15=150W  
17=175W  
Colors (add as suffix/  
must specify)  
WH=White  
BK=Black  
AP=Grey  
BZ=Bronze  
DP=Dark Platinum  
GM=Graphite Metallic  
2=Double Fuse  
[208, 240 or 480V] 6  
MA1010-XX=Single Tenon Adapter for 3 1/2" O.D. Tenon  
MA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon  
MA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon  
MA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon  
MA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon  
MA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon  
MA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon  
MA1017-XX=Single Tenon Adapter for 2 3/8" O.D. Tenon  
MA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon  
MA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon  
MA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon  
MA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon  
MA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon  
MA1213-XX=External House-side Shield Kit [EPA=0.38]7  
3=Three Place Terminal Block  
4=NEMA Twistlock Photocontrol  
Receptacle  
20=200W  
B=Internal House-side Shield 7  
DD=Deep Door  
25=250W  
32=320W3, 4  
35=350W3, 4  
DM=Direct Mount for Round or  
Square Pole  
Distribution  
Horizontal Lamp  
40=400W4  
DW=Direct Wall Mount Kit  
E=Quartz Restrike w/Delay  
[Also Strikes at Cold Start] 8  
H=Plug-in Starter Receptacle  
HL=Hi/Low Dimming 9  
L=Lamp Included  
2F=Type II Formed  
2S=Type II Segmented  
3F=Type III Formed  
3S=Type III Segmented  
4F=Type IV Formed  
4S=Type IV Segmented  
5F=Type V Formed  
5S=Type V Segmented  
SL=Spill Light Eliminator  
AF=Automotive Front  
Row  
24=250/400W wired 250W  
42=250/400W wired 400W  
Lamp Type  
S=High Pressure Sodium  
R=Super Metal Halide  
M=Metal Halide  
MS=External Mast Arm Adapter  
P=Button Type Photocontrol  
[120, 208, 240 or 277V] 6  
Q=Quartz Restrike  
P=Pulse Start Metal Halide  
Ballast Type  
C=CWI  
[Hot Restrike Only] 8  
R=Removable Power Tray  
U=U.L. Listed  
V=Polycarbonate Vandal Shield  
WM=Wall Bracket with 8" Arm  
Vertical Lamp  
H=Reac./HPF  
K=10KV CWA  
N=Hi. Reac./NPF  
P=Hi. Reac./HPF  
R=Reac./NPF  
W=CWA  
3V=Type III Vertical 5  
4V=Type IV Vertical 5  
AR=Area Round 5  
AS=Area Square 5  
NOTES: 1 8" arm and round pole adapter included with fixture. 2 Standard with mogul-base socket for HPS and 100-400W MH. Standard with medium-base socket for 70W MH. 3 320/350W Pulse Start Metal Halide lamp  
only. 4 Requires reduced envelope lamp. 5 Vertical lamp optics ship standard with deep door. Flat glass not available for 250W—400W. 6 Must specify voltage. 7 House-side shield not available on 5S, 5F, AS, AR  
and SL optics. 8 Quartz options not available with SL and AF optics. 9 Requires vertical lamp orientation. Provides 24V low voltage leads used in dimming controls. 10 Specifications and dimensions subject to  
change without notice.  
Specifications and Dimensions subject to change without notice.  
Streetworks • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801  
TMU_ADH081549  
08/05/2008 2:32:09 PM  
 
PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]  
Footcandle Table  
Select mounting height and read across for  
footcandle values of each isofootcandle line.  
Distance in units of mounting height.  
Mounting Footcandle Values for  
Height  
Isofootcandle Lines  
A
B
C
D
E
A
B
C
D
A
B
C
D
A
B C  
D
E
A
B
C D E  
175W [3V/AS]  
15'  
20'  
25'  
1.70  
1.00  
0.64  
0.85  
0.50  
0.32  
0.34  
0.20  
0.13  
0.17  
0.10  
0.06  
--  
--  
--  
250W [SL]/400W [3S]  
20'  
25'  
30'  
2.00  
1.28  
0.88  
1.00  
0.64  
0.44  
0.50  
0.32  
0.22  
0.20  
0.13  
0.09  
0.10  
0.06  
0.04  
TMU17MXX3VF  
175-Watt MH  
TMU17MXXASF  
175-Watt MH  
TMU25MXXSLF  
250-Watt MH  
TMU40MXX3SF  
400-Watt MH  
14,000-Lumen Clear Lamp  
Type III Vertical  
Flat Glass  
14,000-Lumen Clear Lamp  
Area Square  
Flat Glass  
20,500-Lumen Clear Lamp  
Spill Light Eliminator  
Flat Glass  
36,000-Lumen Clear Lamp  
Type III Segmented  
Flat Glass  
Footcandle Table  
Select mounting height and read across for  
footcandle values of each isofootcandle line.  
Distance in units of mounting height.  
Mounting Footcandle Values for  
Height  
Isofootcandle Lines  
A
B
C
D
E
A
B
C
D
E
A
B
C
D E  
A
B
C D E  
A
B
C
D
E
400W [3V/4V/5S/AR]  
20'  
3.00  
1.50  
0.75  
0.30  
0.15  
25'  
30'  
2.00  
1.38  
1.00  
0.69  
0.50  
0.34  
0.20  
0.13  
0.10  
0.06  
TMU40MXX3VS  
400-Watt MH  
TMU40MXX4VS  
400-Watt MH  
TMU40MXX5SF  
400-Watt MH  
TMU40MXXARS  
400-Watt MH  
36,000-Lumen Clear Lamp  
Type III Vertical  
Sag Glass  
36,000-Lumen Clear Lamp  
Type IV Automotive Perimeter Type V Segmented  
Sag Glass Flat Glass  
36,000-Lumen Clear Lamp  
36,000-Lumen Clear Lamp  
Area Round  
Sag Glass  
MOUNTING CONFIGURATIONS  
Wall Mount  
Arm Mount Single  
E.P.A.  
TMU  
Arm Mount 2 @ 180°  
E.P.A.  
TMU  
Arm Mount 2 @ 90°  
E.P.A.  
TMU  
Arm Mount 3 @ 120°  
E.P.A.  
TMU  
Arm Mount 3 @ 90°  
E.P.A.  
TMU  
Arm Mount 4 @ 90°  
E.P.A.  
TMU  
Recessed Door 1.22  
Recessed Door 2.44  
Recessed Door 2.44  
Deep Door 2.90  
Recessed Door 3.23  
Deep Door 3.92  
Recessed Door 3.23  
Recessed Door 3.63  
Deep Door  
1.45  
Deep Door  
2.90  
Deep Door  
3.92  
Deep Door  
4.43  
Specifications and Dimensions subject to change without notice.  
Streetworks • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801  
TMU_ADH081549  
08/05/2008 2:32:09 PM  
 

Coleman Camping Equipment 5151C User Manual
Compaq Network Card iPAQ Internet Device User Manual
Continental Electric Freezer CE64731 User Manual
Cooper Bussmann Automobile Parts HPC D User Manual
Crosley Refrigerator 241824301 User Manual
Crosley Refrigerator 241824400 User Manual
Dual Cassette Player MXC22 User Manual
Exide Automobile Battery Charger DEC200 User Manual
Fusion Marine GPS System MS AV600 User Manual
Generac Power Systems Portable Generator 009600 5 009734 5 User Manual